WETTERAU Small Engine

Custom Machine Work | Specializing in Competition Garden Tractor Parts

Posted 12/28/01

---

I've been pulling tractors for about 18 years now and started making parts and building engines for several years, never had an engine failure yet, I just do the best I can, to do it right the first time. I haven't built many aftermarket engines (Jones, Woolam, etc.). However, I do have several Kohler blocks running out there in classes ranging from basic Stock to Pro-Stock. Also, I have Dart rear end kits and I rebuild Cub rear ends for pulling, and I build driveshafts and running gear for outlaws (motorcycle engine) tractors. I can build almost anything for garden pulling tractors, bore blocks, turn cranks, port and polish, shave cylinder heads, cut valve seats, etc. Need a custom part made? Just let me know!

Here's some pictures of my work:

Extra tough 3-pin driver plate:

50.5 c.i. Pro-Stock Jones block in progress:

Cast cam gear:

Aluminum clutch driver hub:

Inserted stock connecting rod:

Aluminum starter pulley:

Steel flywheel:

Dual Wheel Adapters:

Contact:
Robert Wetterau, Owner | 325 McElhiney Rd., Dickson, TN 37055 | Phone: (615) 441-4605