Click Here To Visit My Other Web Sites... Home Page & Introduction to the Sport of Garden Tractor Pulling Balancing the Crankshaft to the Piston/Connecting Rod Assembly for a Single Cylinder Engine Putting the Brakes on a Cub Cadet Information about the Kohler Carburetor, Various Fuels and Fuel Systems Improving the Drive Clutch Assembly in a Cub Cadet Information about the Cylinder Head on Single Cylinder Kohler Engines Vital Information about Engine Rebuilding, Buildups and Modifications Important Information About Small Engine Flywheels Useful Formulas, Conversion Charts, etc. Using an Adjustable Pulling Hitch on a Garden Pulling Tractor Hot Links to Various Garden Tractor Pulling Clubs and Associations Ignition Solutions for Small Engines and Garden Pulling Tractors Important Information About the Cub Cadet Oil Pan Garden Pulling Tractor & Mini-Rod Picture Gallery Information About Tractor Pulling Sleds and Miller's Pulling Sled Rental, Sleds For Sale & Sled Construction Garden Tractor & Mini Rod Pulling Sled Picture Gallery Starter Motors, Electrical and Charging Systems Improving and Modifying the Steering on an IH Cub Cadet Modifying the IH & Early MTD Cub Cadet Transaxles for Heavy Use and/or Pulling Applications Information about the Valves, Seats, Porting, Camshaft and Header Pipe Various Garden Pulling Tractor Engine Builders, Parts Suppliers and Service Providers How to Weight a Garden Pulling Tractor (so it will pull better) The Importance of Having Wheelie Bars on a Pulling Tractor Information about Tractor Pulling Tires and How to Widen Steel Wheels Miscellaneous Garden Tractor Pulling Tips and Tricks

A-1 Miller's Performance Enterprises Online Catalog Offering Quality Products and Professional Workmanship at Reasonable Prices! We've always been a "green" company! We reduce, reuse, recycle and restore when others just "throw it away." In other words, we'd rather repair an old part than replace it with a new part.

Brian Miller's Pulling Sled Rental and Tractor Pulling Sled Construction/Sleds For Sale NOTE: To place an order with us, please call or send an email with a description of the parts or services you need. Because as of right now, we're not set up to accept orders through our web sites. We also have no parts catalogs to mail out. So you'll have to print out this web site. NOTE: Everything in this web site is up-to-date and still available. I only update when I make a change in a listing of a part. If a part is no longer available, I mention this instead. Prices are subject to change without notice due to the rising cost in materials. We're in the lawn mower/small repair business too, so we can get a lot of other parts that's not listed on our web sites. Just let me know what you need and we'll see if we can get it at a reasonable price. And the condition of these parts are brand new, first line products. No seconds or blems being pawned off on unsuspecting customers. Optimized for 1024 x 768 screen resolution. To search for a word or phrase in this Web page, with Microsoft Internet Explorer 6.x or Google Chrome, press CTRL+F to open the Find dialog box. "Perfection takes time. If it's worth having, it's worth waiting for."

To place an order and/or for technical assistance, please contact:
A-1 Miller's Performance Enterprises | 1501 W. Old Plank Rd. | Columbia, MO 65203-9136 USA | Phone: 1-573-875-4033. Please call Monday-Friday, 9am to 5pm, Central time. If no answer, please try again later. (When speaking with Brian, please be patient because I stutter.) Fax: 1-573-449-7347. E-mail: pullingtractor@aol.com. You can also contact me through Yahoo! Messenger: Find me here: Directions to our shop | Yahoo! Maps, 1501 W. Old Plank Rd., Columbia, MO | 1501 West Old Plank Road, Columbia, MO - Google Maps or Map of 1501 West Old Plank Road, Columbia, MO by MapQuest.

---

* Track Master *

Information about Brian Miller's One-of-a-Kind Motorized/Self-Propelled Garden Tractor Pulling Sled -

Dubbed by many professional pullers as the "best sled in the nation" and it's "way ahead of its time" (not bragging, just stating a fact), "Track Master" pulling sled has style, beauty and grace. It's easy to start, get speed and sure to stop. "Track Master" was designed, constructed and engineered solely by Brian Miller in late 1992 and completed in 1995. It took about 6 months to draw the plans on paper and 2 years (off and on) to build it. A stock 14hp Kohler engine, which sits next to the operator on the rear, propels it. A hydraulically controlled front axle with small steering wheels lowers which raises the skid pan off the ground, making it easy to maneuver.

Professionally-built for garden tractors, ATVs, motorcycle engine-powered pulling tractors and small-wheel mini-rods. The total weight of the entire sled is about 6,000 lbs. There's about 2,000 lbs. in the weight box, which has 8 control [distance] speeds. When the box is in the rest position at the rear, the front of the sled (skid pan) is very light, making the sled easy to start pulling. When the box is "topped out," about 5,400 lbs. or 90% of the total weight of the sled is transferred over the skid pan, stopping garden tractors efficiently. This sled can be used for all garden tractors, light- to heavy-weight ATVs and with added weight in the pan, it'll stop 1,500 lb. "small wheel" (26-12.00x12 tires) mini-rods!

"Track Master" is 17 feet long (without towbar) and very functional. It's used mainly in the central Missouri area. Click HERE and HERE to see our sled in action!

Miller's Sled Rental - Top of page

The rental price is $500.00 per event plus $1.00 per mile one way from Columbia, Missouri to your pull site. If it's a two day event at the same location, then the second day will be half price, less mileage. No refund(s) whatsoever if event(s) are rained out.

The rental price includes use of our sled, weighing scales (from Central City Scales [http://www.ccscales.com]) with a portable 4' x 8' platform connected to a large easy-to-read electronic digital display. We also furnish a convenient and very accurate electronic distance measuring system (from Agri-Tronix Sled Monitor System [http://www.atcindus.com]) with an easy-to-read digital sled monitor and a remote display that's placed on a table at the announcer's/judge's stand. Our sled has two filled fire extinguishers with quick access, plus the ability to pull even the toughest killswitch!

We use our sled on dirt (clay) tracks only. Rather if it's a small community homecoming, special fund-raising event, county fair, state fair or an NQS event, "Track Master" pulling sled will provide a quality show for all ages to participate in or come to watch. It's easy to start and sure to stop, even on short, indoor tracks. If you have an event and want a crowd drawing attraction, give us a call. And we go wherever our sled and equipment is needed and we operate them. Click here to read and print out our sled rental agreement.

If you'd like to rent "Track Master," please contact A-1 Miller's Performance Enterprises | 1501 W. Old Plank Rd. | Columbia, MO 65203-9136 USA | Phone: 1-573-875-4033. Please call Monday-Friday, 9am to 5pm, Central time. If no answer, please try again later. (When speaking with Brian, please be patient because I stutter.) Fax: 1-573-449-7347. E-mail: pullingtractor@aol.com. You can also contact us through Yahoo! Messenger: Find us here: Directions to our shop | Yahoo! Maps, 1501 W. Old Plank Rd., Columbia, MO | 1501 West Old Plank Road, Columbia, MO - Google Maps or Map of 1501 West Old Plank Road, Columbia, MO by MapQuest.

Tractor Pulling Sled Construction/Sleds For Sale -

• Small Pull-Back Sled for ATVs/UTVs and Garden Tractors. This sled will be easy to pull for stock garden tractors and sure to stop the toughest garden tractors. It'll look somewhat like this one: http://gardentractorpullingtips.com/galleries/sleds/tgtpa.jpg. $6,000 for parts & labor.
• Small Self-Propelled/Motorized Sled for ATVs/UTVs, Garden Tractors and small wheel mini-rods. This sled will be easy to pull for stock garden tractors and sure to stop the toughest garden tractors. The engine will be up-front and the weight box drive mechanisms will be underneath the operator. It'll look and operate similar to the "Sledge Hammer" sled http://www.sledgehammerpulling.com/. $15,000 for parts & labor.
• Medium-Size Pull-Back Sled for and Antique/Classic Tractors, Stock Pickup Trucks and Big-Wheel Mini-Rods. $25,000 for parts & labor.
• Medium-Size Self-Propelled/Motorized Sled for Mini-Rods and Antique/Classic Tractors. $50,000 for parts & labor.

For a North American Sled Operator's Association rule book, contact: Steve Zimmer at 740-336-1319 or 740-410-1224.

Advertisement:

If you need a narrowed automotive rear end, please contact A-1 Miller's Performance Enterprises | 1501 W. Old Plank Rd. | Columbia, MO 65203-9136 USA | Phone: 1-573-875-4033. Please call Monday-Friday between 9am to 5pm, Central time. (When speaking with Brian, please be patient because I stutter.) Fax: 1-573-449-7347. E-mail: pullingtractor@aol.com. You can also contact us through Yahoo! Messenger: Find us here: Directions | Yahoo! Maps, 1501 W. Old Plank Rd., Columbia, MO | 1501 West Old Plank Road, Columbia, MO - Google Maps or Map of 1501 West Old Plank Road, Columbia, MO by MapQuest. More of our parts & services: Transmission, Transaxle Parts, Rebuilds & Machine Shop Services NOTE: To place an order, please call or send an email with a description of the parts or services you need. Because as of right now, we're not set up to accept orders through our web sites. Automotive Rear End Narrowing Service - For a mini-rod pulling vehicle, street rod/hot rod, to control the weight box in a pulling sled, etc. Details include: Dana, GM, Ford (8" or 9") or Import automotive rear ends. Or you can furnish your own. Professionally narrow axle housings and axles to your measurements and specifications. Install ring and pinion gears to your specifications (ratio) or requirements, new axle bearings (if needed) and new axle oil seals. For a pulling sled, install a minimal tooth count sprocket for a #50 chain on right axle (when facing center yoke) and reinstall brake drum and brakes with a long parking brake cable on left axle (when facing center yoke). $500.00 and up (depending on type of rear end and work involved), plus shipping. Financing available. A minimum of 50% deposit is required on all narrowed rear end orders until it's paid in full. This is to secure your rear end so no one else can come along and purchase it.

Miller Pulling Promotions - "Track Master" Pulling Sled Rental Agreement Person who transports Miller's sled, sled operator and all helpers of sled receives free admission with no charge for gate fees. No exceptions! Sled owners (Brian and Billy Miller) shall not be held responsible in any way for injuries to any participants (pullers), damage(s) or breakage of parts on any pulling vehicle. No exceptions! Operation of sled and/or weight or gear changes to sled will be authorized by a member of Miller Pulling Promotions. For safety reasons and for clear visibility of pulling vehicles to sled operator, Miller's sled will not be operated under severe dusty track conditions. Therefore, the track must be "watered down" to prevent dust accumulation, before and if needed, during the pull (between classes). The sled, weighing scales and measuring device will be provided by Miller Pulling Promotions at the pull site(s). Assistance shall be provided by pull site crew and/or pullers to set up and load all equipment before and after pull. The pull site shall provide all necessary equipment (blade-off tractor, footage markers, out-of-bounds striping, etc.) and crew to operate equipment to keep track conditions properly maintained. The pull hitch (drawbar) on all pulling vehicles must have at least a 1-1/2" hole, clevis opening or trailer ball for hook. For safety reasons, all pulling vehicles must have wheelie bars. No exceptions! If pulling vehicle operates engine at wide open throttle, it must have a killswitch to shut off engine located near pull hitch in case vehicle goes out of bounds or hitch breakage. All spectators shall remain at a safe distance a minimum of 15 feet from out of bounds line of pulling track, with a barrier (fence or yellow caution tape/ribbon) positioned no less than 10 feet from out of bounds line on either side of track. Name of Fairground or Pull Site:________________________________________________________________________ Agreed Price for Rental of Miller's Sled, Scales and Measuring Device:$________________________________________ Date(s) & Time(s) for Pull(s):__________________________________________________________________________ Directions to Pull Site(s):______________________________________________________________________________ Location (Address) of Pull Site:_________________________________________________________________________ The Terms in this Agreement are Approved by:______________________________________________________________ (Pull Committee Chairman) Accepted by: Brian and Billy Miller____________________________________________________ Date _______________ (Miller Promotions Representative) Accepted by: ____________________________________________________________________ Date _______________ (Pulling Organization's Representative) Address:_____________________________________________ City:___________________ State:____ Zip:___________ Please contact Miller Pulling Promotions for prior approval of this agreement in case we have another pull scheduled on the same day as yours, and if threatening weather should occur on the day of your pull. Make a copy of this agreement for your records. Remit to: Miller Pulling Promotions, 1501 W. Old Plank Rd., Columbia, MO 65203-9136 | Phone: 1-573-875-4033 | Fax: 1-573-449-7347 | E-mail: pullingtractor@aol.com | Web site: http://gardentractorpullingtips.com/a1sled.htm

Click here to print out our sled rental agreement above.

To place an order and/or for technical assistance, please contact:
A-1 Miller's Performance Enterprises | 1501 W. Old Plank Rd. | Columbia, MO 65203-9136 USA | Phone: 1-573-875-4033. Please call Monday-Friday between 9am to 5pm, Central time. (When speaking with Brian, please be patient because I stutter.) Fax: 1-573-449-7347. E-mail: pullingtractor@aol.com. You can also contact us through Yahoo! Messenger: Find us here: Directions | Yahoo! Maps, 1501 W. Old Plank Rd., Columbia, MO | 1501 West Old Plank Road, Columbia, MO - Google Maps or Map of 1501 West Old Plank Road, Columbia, MO by MapQuest.

IMPORTANT - When sending your part(s) to me for rebuilding or repair, package everything securely so the item(s) won't get damaged in shipping & handling and please include a note in the box with your name, mailing address, phone number (in case we have any questions) and a description of what you want done. When the work is completed, I'll either call or email you an invoice with the total including shipping & handling.

To place an order, please call or email me with your name, complete mailing address and phone number and so I can figure the total with shipping cost and USPS Tracking. All prices are based on a 2% cash discount. For payment, I accept cash (in person), Postal money orders, cashier's checks, MasterCard, VISA, Discover, American Express and Western Union Money Transfer. (Your credit card will be charged the same day the item(s) are shipped; please do not send your credit or debit card information in email.) Or you can pay me through PayPal. (My PayPal account name is my email address. And be sure to mention in PayPal a description of what the payment is for.) If sending a money order, please include a note in the envelope with your name, complete mailing address, phone number and a description of what the payment is for. My mailing address and phone number are below. And I will send you the parts as soon as I receive your payment or when the order is processed.

Ordering Parts -

The prices and parts in our web sites are current as of today. If you wish to place an order with me, please send me an email with a list of parts or call me at 1-573-875-4033. Tell me what part(s) you need and what you plan to use it/them on. I will need your name, mailing address and phone number (in case I have any questions) so I can figure the shipping cost and mail the parts to you. Or if necessary, we'll either call or email you an invoice with the total including shipping & handling. And for payment, I accept cash (in person), money orders, cashier's checks, VISA, MasterCard, Discover and PayPal, whatever you prefer. Our PayPal account name is our email address. And our address and phone number are below. All your information is kept confidential. Prices shown are in U.S. dollars (US $). Shipping, packaging and insurance charges is extra, except where specified, and applies only to the continental United States.

To figure the shipping cost, I weigh the package with the parts, then I go online to the USPS Postage Rate Calculator web site. I type in the weight, our zip code and your zip code, and then it shows me the prices for various ways to ship the package. I always choose US Postal Service because I believe that's the most fastest, economical and reliable method.

Shipping: (United States and it's territories)

• To save you shipping charges, item(s) in a package or cushioned envelope weighing less than 13 oz. is sent by First Class Mail for a 2-6 day delivery.
• Most packaged item(s) weighing over 13 oz. is sent by US Priority Mail for a 2-3 day delivery.
• To save you even more on shipping heavy items, I always try to use the US Postal Services' Flat Rate Priority Mail envelope and boxes (if the item(s) can fit inside the envelope or boxes).
• Some heavy items weighing no more than 70 lbs. is sent by US Mail Parcel Post.
• Item(s) weighing over 70 lbs. is sent by FedEx Ground.
• I do not ship anything COD.

Ship to Canada and elsewhere around the world:

• Item(s) in a package or cushioned envelope weighing less than 1 lb. is sent by US Postal Service Airmail Letter Post for a 4-7 days delivery.
• Packaged item(s) weighing over 1 lb. and up to 66 lb. is sent by US Postal Service Airmail Parcel Post for a 4-10 days delivery.
• I cannot use the US Postal Services' Flat Rate Priority Mail envelopes and boxes to ship outside U.S. territories.
• Item(s) weighing over 67 lbs. or more is sent by FedEx Ground or equivalent services.

^{(When placing an order through PayPal, please specify which parts you need.)}

To make a payment to me through PayPal, go to PayPal's web site ( https://www.paypal.com/ ) and click on (Send Money). Type in my email address, or copy and paste this: pullingtractor@aol.com and then follow the directions. Be sure to mention in PayPal a description of what the payment is for. After you've finished, PayPal will send me an email notifying me that you have made a payment to me for the product(s) or services and amount entered. Then I go to their web site and direct PayPal to deposit the money into my bank account. And I will send the parts to you as soon as I receive your payment. But I may have to order some of the parts if they're not in stock, which should take a few days. In that case, I will send you the parts as soon as they come in. PayPal protects your financial privacy and security. With PayPal, privacy is built in. It's a way for you to pay without exposing their financial information.

Linked pages to our parts & services:

Back to A-1 Miller's Performance Enterprises and Specialty Shop Information

© 1996-Present. Designed and maintained by Brian Miller.